65 pin rubber tube extruder

型号 XJ-75 XJ-90 XJ-120 螺杆直径mm 75 90 120 长径比 14：1 14：1 14：1 电机功率kw 37 55 110 螺杆转速 55 50 45 产量kg/h 80-120 100-300 300-600 用途：销钉冷喂料橡胶挤出机适合于胶管、内胎、胶带、密封产品和其他橡胶制品挤出成型，销钉冷喂料挤出机在机筒上装有销钉，这些销钉深入到螺杆相应的缺口上。同于销钉的作用，使销钉式冷喂料挤出机具有产量高、温度低、能耗低、质量均匀度高、出料稳定、停机后螺杆内橡胶残留少的优点。销钉橡胶挤出机性能特点 1. 机筒设有若干组销钉，能较好、较均匀地搅拌物料。 2. 本机采用交流电机，变频调速，其调速范围大，对生产不同规格的橡胶制品适应性大，操作方便。 3. 本机使用硬齿面橡胶挤出机减速器，其噪音低，传动扭矩大，传动平稳，维修方便。 4. 本机采用喂料辊强迫进料，可加工多层橡胶条料，挤压密实，制品效果好。 5. 本机设有双通道温度自动控制仪，加热时温度波动小，根据不同加工工艺能理想的选择加热温度，并能自动控制被加热的机筒、机头的设定温度。 6. 本机采用机筒电加热，也可使用蒸气加热。机筒采用循环冷却，能即时冷却物料，以防物料分解。特点 1.销钉冷喂料挤出机较普通冷喂料挤出机具有产量大、能耗低、可实现低温等优点 2.对加工不同性能的胶料，其适应性较强 3.本机控制水平较高，操作管理方便 4.采用结构合理的喂料装置，较大的吃料能力，减少人工喂料操作和管理，使喂料均匀 5.螺杆拆卸、换较容易 6.具有较好的自洁型，换胶种方便 7.温度控制精度高，工艺稳定性好

Key words:

Classification:

Rubber, rubber and plastic extrusion line

Business Hotline:

400-0319-386

Related products

Feedback

65 pin rubber tube extruder

Model number	XJ-75	XJ-90	XJ-120
Screw diameter (mm)	75	90	120
Length-diameter ratio	14：1	14：1	14：1
Motor power (kw)	37	55	110
Screw speed r/min	55	50	45
Yield kg/h	80-120	100-300	300-600

Use:

Pin cold feeding rubber extruder is suitable for rubber hose, inner tube, tape, sealing products and other rubber products extrusion molding, pin cold feeding extruder is equipped with pins on the barrel, these pins deep into the corresponding gap on the screw. The same as the role of the pin, the pin type cold feeding extruder has the advantages of high output, low temperature, low energy consumption, high quality uniformity, stable discharge, less rubber residue in the screw after shutdown.

Performance characteristics of pin rubber extruder

1. The barrel is provided with a number of groups of pins, which can mix the material better and more evenly.

2. The machine adopts AC motor, frequency conversion speed regulation, the speed regulation range is large, the production of different specifications of rubber products adaptability, easy to operate.

3. This machine uses hard tooth surface rubber extruder reducer, its low noise, large transmission torque, smooth transmission, easy maintenance.

4. This machine adopts feeding roller to force feeding, can process multi-layer rubber strip, extrusion compaction, product effect is good.

5. The machine is equipped with a double channel automatic temperature controller, the temperature fluctuation is small when heating, according to different processing technology can choose the ideal heating temperature, and can automatically control the heating cylinder, the setting temperature of the machine head.

6. This machine adopts cylinder electric heating, or steam heating. The barrel adopts circulation cooling, which can cool the material in real time to prevent material decomposition.

characteristic

1. Compared with ordinary cold feeding extruder, pin cold feeding extruder has the advantages of large output, low energy consumption, low temperature and so on

2. It has strong adaptability to the processing of rubber materials with different properties

3. The machine has high control level and convenient operation and management

4. Adopt reasonable feeding device, large feeding capacity, reduce manual feeding operation and management, so that the feeding is even

5. It is easy to disassemble and change the screw

6. With good self-cleaning type, easy to change rubber seed

7. High temperature control precision and good process stability